Complete laser flash photolysis system (Spectral Range 310-850 nm) for spectroscopic and kinetic measurements

Complete laser flash photolysis system for spectroscopic and kinetic measurements,
including: ceramic xenon light source; 125 mm
monochromator;
Tektronix digitizer TDS-2000 series with 50 MHz bandwidth;
micro photomultiplier and power supply;
computer (user's choice of desktop or laptop);
cell holder and fiber optic connectors;
fiber optic sensor for laser-sensing pre-trigger signal;
all interfaces and software needed to operate the system.
Does not include laser.

[ Footprint ]
LFP unit: 12” x 24” (20 cm x 61 cm) – includes xenon lamp for Transient Absorption, breadboard, sample compartment and optics.
Digitizer: (15” x 6”; 38cm x 15 cm) can be placed on xenon lamp.
Computer: option of desktop or laptop

[ Weight ]
50 lbs/ 23 kg (approximate)

[ Power Rating ]
110-240 VAC, 50/60 Hz cycle, 3 Amp

[ Ambient Temperature ]
Must be between 5ºC and 55 ºC

[ Humidity ]
Must be between 0% and 95% (non-condensing)

[ Time Response and Time Scales ]
Detector: ~7 ns risetime
Digitizer: 50 MHz bandwidth; 8 bit resolution; record seize: 2,500 points at all time bases; Series TDS2000
Note that the TDS2000 series has many other functions, that are not employed in the LFP systems.
Short time scales: 10 ns with built-in amplifier, or 20 ns with external amplifier Long time scales: Millisecond measurements readily performed.

[ Spectral Range ]
User-selected at the time of order. Cannot be changed by user.
RED option: 310-850 nm with RED PMT and grating

[Specifications 상세 파일 참조]